Balancing Ball - Suspend a ball in a stream of air!

Balancing Ball

 

Suspend a ball in a stream of air

A ball stably levitated on an invisible stream of air is a dramatic sight. When you try to pull the ball out of the airstream, you can feel a force pulling it back in. You can alsofeel that the airstream is being deflected by the ball. This Snack shows one of the forces that give airplanes lift. 
 

Small Snack

• A hair dryer (blower)
• A spherical balloon or table tennis ball
• Tissue paper
• Optional: a stand for the blower

Large Snack

• A vacuum cleaner
  It should come with a reversible hose, like a Shop Vac has, so it can be used as blower.
• A light-weight vinyl beach ball
• Tissue paper
• Optional: A stand for the hose

 

None required. Note, though, that you can make a large or a small Snack (see "Materials"). Depending on the blower you choose, some experimentation may be necessary to find a satisfactory ball. You might want a partner to help you, or you can devise some sort of stand for the blower. That way, your hands will be free to experiment with the ball in the airstream.

(5 minutes or more)
Blow a stream of air straight up. Carefully balance the ball above the airstream. Pull it slowly out of the flow. Notice that when only half the ball is out of the airstream, you can feel it being sucked back in. Let go of the ball and notice that it oscillates back and forth and then settles down near the center of the airstream.

With one hand, pull the ball partially out of the airstream. With the other hand, dangle a piece of tissue paper and search for the airstream above the ball. Notice that the ball deflects the airstream outward. On the large version of this Snack, you can actually feel the deflected airstream hit your hand.
Tilt the airstream to one side and notice that the ball can still be suspended.

Balance the ball in the airstream and then move the blower and the ball toward a wall (try the corner of a room). Notice the great increase in height of the suspended ball. 
 

When the ball is suspended in the airstream, the air flowing upward hits the bottom of the ball and slows down, generating a region of higher pressure. The high-pressure region of air under the ball holds the ball up against the pull of gravity.

When you pull the ball partially out of the airstream, the air flows around the curve of the ball that is nearest the center of the airstream. Air rushes in an arc around the top of the ball and then continues outward above the ball.

This outward-flowing air exerts an inward force on the ball, just like the downward flow of air beneath a helicopter exerts an upward force on the blades of the helicopter. This explanation is based on Newton's law of action and reaction.
Another way of looking at this is that as the air arcs around the ball, the air pressure on the ball decreases, allowing the normal atmospheric pressure of the calm air on the other side of the ball to push the ball back into the airstream.

People immediately raise several questions when they hear the second explanation:

Why does air flowing over a surface in an arc exert less pressure on that surface? To answer this question, consider a rider in a roller coaster going over the top of a hill at high speed. The force that the rider exerts on the seat decreases as the rider goes over the top of the hill. In the same way, the air that arcs around the side of the ball exerts less force on the ball.

Why does air follow the surface of the sphere? Consider what would happen if the air did not curve around the ball. An "air shadow" would be formed above the ball. This air shadow would be a region of low pressure. The air would then flow into the low-pressure air shadow. So the air flows around the ball.

An alternative explanation is provided by the Bernoulli principle. If you pull the ball far enough out of the airstream, then the air flows over only one side of the ball. In fact, the airstream speeds up as it flows around the ball. This is because the middle of the ball sticks farther into the airstream than the top or bottom. Since the same amount of air must flow past all parts of the ball each second, it must flow faster where it is pinched together at the middle. The Bernoulli principle states that where air speeds up, its pressure drops. The difference in pressure between the still air and the moving air pushes the ball back into the center of the airstream.

When you approach a wall with the balanced ball, the highpressure region under the ball becomes a region of even higher pressure. The air that hits the bottom of the ball can no longer expand outward in the direction of the wall. The higher pressure drives the ball to a greater height.

This exhibit illustrates one of the reasons that airplanes fly. A flat wing will fly if it is tipped into the wind, so that it forces air downward. Newton's third law tells us that for every action there must be an equal and opposite reaction: The reaction to the downward force of the wing on the air is the upward force of the air on the wing. You can feel this lifting force if you hold your hand out the window of a moving car and tip your hand so that it forces the air downward.

A wing that is curved on top will deflect air downward and produce lift even if it isn't tipped. The explanation for this is essentially the same as the one given in this Snack. The wing collides with air, creating a region of high pressure in front of the wing. This high pressure produces drag, which is always associated with lift. The high-pressure air in front of the wing accelerates air over the curved surface of the wing. This air then flows downward behind the wing. Airplanes fly because their wings throw air downward.

It is sometimes said that air must flow faster over the curved top surface of a wing than over the flat bottom. This is said to happen because the air has to meet up again at the far end of the wing, and since the air traveling over the curved path must travel farther, it must travel faster. This is not true. Two parcels of air that start together, then split to flow over different sides of a wing, do not, as a rule, rejoin at the far end of the wing.

Read more »

Anti-Gravity Mirror - It's all done with mirrors!

Anti-Gravity Mirror

 

It's all done with mirrors.

A reflection of your right side can appear to be your left side. With this Snack, you can appear to perform many gravity-defying stunts. 

 

• A large, flat, plastic mirror, 2 x 3 feet (60 x 90 cm) or larger
  It is important to get a good, flat mirror, since distortions will ruin the effect. Plastic mirrors are expensive, but glass mirrors can be dangerous. Look in your local yellow pages for a nearby plastics store.
• A length of 2 x 4 inch wood and a router tool, or ring stands and clamps,
  This makes a stand to hold the mirror upright.
• Optional: A sturdy table on which you can stand.
• A partner. Adult help.

 

(with stand:15 minutes or less: without: 5 minutes or less)
You can make a stand for the mirror from a length of 2 x 4 inch wood. Use a router to cut a groove that is just wide enough to slip the mirror into. To help stabilize the mirror, you can nail some scrap wood to the ends of the board. You can also hold the mirror in a vertical position using ring stands and clamps, or just with your hands. An assistant might be of help here.

(15 minutes or more)
Stand the mirror on the floor or on a sturdy table. Put one leg on each side of the mirror. Shift your weight to the foot behind the mirror. Lift your other leg and move it repeatedly toward and away from the mirror. To an observer, you'll appear to be flying. If you use this Snack as a demonstration, you can make the effect more dramatic by covering the mirror with a cloth, climbing onto the table, straddling the mirror, and then dropping the cloth as you "take off."

A person standing with the edge of a large mirror bisecting his or her body will appear whole to a person who's watching. To the observer, the mirror image of the left half of a person looks exactly like the real right half. Or if the person is standing on the opposite end of the mirror, the right half looks like the real left half. The person looks whole because the human body is symmetrical. The observer's brain is tricked into believing that an image of your right side is really your left side. So just straddle the mirror, raise one leg, and you'll fly!

Try this out in department stores that have full-length mirrors available. If your school has a dance room with a mirrored wall and a doorway cut into it, you may be able to use it. With these full mirrors, stand at the edge of the doorway so that just half of your body is being reflected. This will be an even more convincing flight.

The cars that floated across the desert in the movie Star Wars each had a full-length mirror attached along their lower edge, hiding the wheels. A camera pointed at a car saw a view of reflected sand and shadow in the mirror. That is how the cars appeared to float above the sand.

Read more »

A flash of light prints a lingering image in your eye.

 

Afterimage

A flash of light prints a lingering image in your eye.

After looking at something bright--such as a lamp or a camera's flash--you may continue to see an image of that object when you look away. This lingering visual impression is called an afterimage. 

• A flashlight
• White paper
• Opaque black tape (such as electrical tape).

(15 minutes or less)
Tape a piece of white paper over a flashlight lens. Cover most of this paper with strips of opaque tape. In the center of the lens, leave an area uncovered, so that the light can shine through the paper. This area should be a square, a triangle, or some other simple, recognizable shape.

(15 minutes or more)
In a darkened room, turn on the flashlight, hold it at arm's length, and shine it into your eyes. Stare at one point of the brightly lit shape for about 30 seconds. Then stare at a blank wall and blink a few times. Notice the shape and color of the image you see. Try again--first focusing on the palm of your hand, and then focusing on a wall some distance from you. Compare the size of the image you see in your hand to the image you see on the wall. Close your left eye and stare at the bright image with your right eye. Then close your right eye and look at the white wall with your left eye. You will not see an afterimage.

You see because light enters your eyes and produces chemical changes in the retina, the light-sensitive lining at the back of your eyes. Prolonged stimulation by a bright image (here, the light source) desensitizes part of the retina. When you look at the white wall, light reflecting from the wall shines onto your retina. The area of the retina that was desensitized by the bright image does not respond as well to this new light input as the rest of the retina. This area appears as a negative afterimage, a dark area that matches the original shape. The afterimage may remain for 30 seconds or longer.

The apparent size of the afterimage depends not only on the size of the image on your retina, but also on how far away you perceive the image to be. When you look at your hand, you see the negative afterimage on your hand. Because your hand is near you, you see the image as relatively small--no bigger than your hand. When you look at a distant wall, you see the negative afterimage on the wall. But it is not the same size as the afterimage you saw on your hand. You see the afterimage on the wall as much bigger--large enough to cover a considerable area of the wall. The afterimage is not actually on either surface, but on your retina. The actual afterimage does not change size; only your interpretation of its size changes.

This helps explain a common illusion that you may have noticed. The full moon often appears larger when it is on the horizon than when it is overhead. The disk of the moon is the exact same size in both cases, and its image on your retina is also the same size. So why does the moon look bigger in one position than in the other? One explanation suggests that you perceive the horizon as farther away than the sky overhead. This perception might lead you to see the moon as a large disk when it is near the horizon (just as you saw the afterimage as larger when you thought it was on the distant wall), and as a smaller disk when it is overhead (just like the smaller afterimage in the palm of your hand).

Negative afterimages do not transfer from one eye to the other. This indicates that they are produced on the retina, and not in the visual cortex of the brain where the signals would have been fused together.

For up to 30 minutes after you walk into a dark room, your eyes are adapting. At the end of this time, your eyes may be up to 10,000 times more sensitive to light than they were when you entered the room. We call this improved ability to see night vision. It is caused by the chemical rhodopsin, in the rods of your retina. Rhodopsin, popularly called visual purple, is a lightsensitive chemical composed of vitamin A and the protein opsin.

You can use the increased presence of rhodopsin to take "afterimage photographs" of the world. Here's how:

Cover your eyes to allow them to adapt to the dark Be careful that you do not press on your eyeballs. It will take at least 10 minutes to store up enough visual purple to take a "snapshot." When enough time has elapsed, uncover your eyes. Open your eyes and look at a well-lit scene for half a second (just long enough to focus on the scene), then close and cover your eyes again. You should see a detailed picture of the scene in purple and black. After a while, the image will reverse to black and purple. You may take several "snapshots" after each 10-minute adaptation period.

For a more complete desciption of this experiment, see Paul Hewitt's Conceptual Physics Lab Manual (HarperCollins College Publishers, New York, 1993).

Read more »

Geek deals: $180 discount Dell XPS 12 convertible, 50-inch plasma

When it comes to laptops, there is one major thing that catches my eyes: the screen. Not only do I have a preference towards high resolution (as we’ve covered many a time in these deals), but the quality of the screen is paramount as well.

When you can get an ultraportable laptop with a top notch screen and great performance, it is nearly an event worth celebrating. When the same machine is available in an innovative, convertible chassis, that’s pretty sweet. Toss in some rare discounts and we’ve got the makings of a hot deal.

 

Dell’s XPS 12 is definitely one of the more unique laptops available today. The 12.5-inch display serves up an impressive 1920×1080 pixels and does it on an IPS multi-touch LCD panel. Not only is it super crisp and gorgeous high resolution, but the wide viewing angles, rich colors, and of course touch capability combine to make for one killer screen.

Then consider the XPS 12′s unique chassis: the screen rotates within the display frame itself, allowing you to use it as either a traditional laptop or slate tablet. We’ve seen similar tricks before on other tablets, but none that achieved it quite like this and the reviews look good.

Right now you can get a bonus $80 coupon on any of the XPS 12 models. Combining this with $100 instant savings on the base model with Core i5, 4GB of RAM, and 128GB SSD nets you the lowest-ever price on an XPS 12 — $1019.99.

If you can front a little more coin, you can snag an upgraded model with 8GB RAM and 256GB SSD for $1419.99 after coupon, plus a $300 Dell e-gift card. This gift card is good for anything sold by Dell.com, so presuming you want to snag some new electronics anyway, this results in a net out of pocket cost of just $1119.99 for a well spec’d premium machine.

Read more »

Thinner MacBook Pro using a Haswell processor expected at WWDC

On June 10 Apple kicks off its 4-day Worldwide Developers Conference in San Francisco, better known as WWDC. Last year’s conference saw a new MacBook Pro unveiled complete with a Retina Display and a resolution of 2560 x 1600. And this year the focus is yet again expected to be on the MacBook Pro and Apple’s thinner and lighter laptop the MacBook Air.
Of course, Apple isn’t saying anything until WWDC begins, but that doesn’t stop analysts taking educated guesses as to what we can expect to see. This year, Intel’s Haswell processors are expected to allow Apple to make a few changes to their laptop line up. More specifically, it’s expected the Pro models will get even thinner.

Currently, both the MacBook Pro and Air use Intel’s Ivy Bridge processors. Haswell improves upon Ivy Bridge in a number of ways, but most significantly for Apple, reduces power consumption and adds an advanced power saving system. That means less heat production and the same battery life from a smaller battery.

If Apple embraces Haswell early, which it is expected to do, we could see a new MacBook Pro unveiled that’s even thinner than the current 0.95-inch 2012 version. Alternatively, we could see the thickness stay the same, but the battery life extended beyond the existing 7 hours Apple quotes.

KGI securities analyst Ming-Chi Kuo believes Apple will opt for a thinner MacBook Pro. The FaceTime HD camera is also expected to improve from the existing 720p part to a 1080p-capable solution. As for the MacBook Air, alongside a similar move to Haswell processors, it’s also expected that dual built-in microphones will be added for improved voice quality.

Such improvements are just speculation, but I’m sure many would argue the MacBook Pro is already thin enough and improved battery life is more desirable. Apple shipping a new Pro that looks the same as the existing model, but achieves 10 hours of battery life surely wouldn’t lose it any fans. A similar battery life improvement for the MacBook Air would also no doubt be welcomed.

Read more »